Waterproof Luxury Vinyl Floor Sticker Peel and Stick Wood Look Vinyl Planks
Product Basic Information
| Main Size |
6”x36”(152X914mm) 12”x24”(305x610mm) 4”x36”(102X914mm) 18”x36”(457x914mm) 12”x12”(305x305mm) |
| Main Thickness | 1.2mm/1.5mm/2.0mm/2.5mm/3mm |
| Wear layer | 0.1mm/0.2mm/0.3mm |
| Raw Material | Recycled or Virgin PVC Vinyl |
| Application | Residential |
| Installation | Self adhesive / Peel & Stick |
| Advantage | Waterproof/fireproof/soundproof/Environmental-friendly |
| Using Places | Residential house |
| Warranty | 3-5 years |
| MOQ | 2000 sqms/color design |
| Place of Origin | Nanjing, China |
| Delivery Time | Within 30 days |
| Certificate | CE/Floorscore/ISO9001 |
| Production Capacity | 500,000 sqms per month |
| Loading Port | Nanjing/Shanghai/Tianjin |
Package Information
| Size | Pcs/color box | Boxes/pallet | Pallets/20’GP | sqms/20’GP | Weight/20’GP |
| 6”x36”x1.5mm | 30 | 90 | 20 | 7500 | 22.5 tons |
| 4”x36”x1.5mm | 30 | 128 | 20 | 7100 | 21.5 tons |
| 12”x24”x2mm | 20 | 72 | 20 | 5360 | 21.2 tons |
| 18”x36”x2mm | 15 | 46 | 20 | 5770 | 21.8 tons |
Installation Instructions
PVC Flooring Installation General Instructions
Noted that this products can be just used in family place.
TOOLS FOR THE INSTALLATION
You must have a meter, cutter, metal square and pencil.
IMPORTANT WARINGS TO COVER THE GUARANTEE
- Keep a label, barcode and production batch.
- The room where you are going to install our vinyl flooring must permanently maintain a temperature of between 12 and 25 ℃.
- In the case of installing over a radiant heating system, the floor temperature must not exceed 28℃.
- Avoid exposure to direct sunlight: the direct incidence of the sun rays may contribute to an abnormal dilation of the floor and for the adhesive glue to become liquid and filter through the joints.
- Humid areas: excess humidity or vapour will never damage the PVC plate’s structure; however, it may alter the composition of the self-adhesive glue, causing gluing deficiencies in some areas.
- In all cases, the use floors primer is mandatory.
- If you install vinyl from different batches, bare in mind that they could have colour and shine differences. Always check that the boxes have the same production batch number. No claims will be accepted due to change of colour or shine once the product has been installed.
BEFORE THE INSTALLTION
- Check that all the boxes you need have the same batch number.
- Unpack the planks/tiles from their packaging at least 24 hours before installing them. After unpacking them, store the planks/tiles flat in small piles(decoration facing upwards) at the premises.
- The planks/tiles must not be installed if the room and support temperature are below 15℃. Ideally, the installation must be carried out at room temperature of around 20℃.
INSTALLATION
Choose one of the plank & tile placing designs and start placing a whole piece in the center of the room. Remove the lower protective sheet, adhere the planks& tiles and press from an edge moving towards the opposite end.
To place the portion of the piece accurately, first place the planks& tile without removing the protective sheet perpendicular to the wall covering the second tile. Cut the first plank& tile in a straight line through the line that overlaps with the second piece and adhere the corresponding part to the ground. Repeat the operation successively. For straight cuttings use the cutter and a straight base, the plank & tile will break easily, cut it out and reproduce it on the plank & tile carefully.
Installation Methods As below
Product Picture
