Waterproof Hexagon LVT Flooring Peel and Stick Vinyl Tile for Home Decor DIY
Product Basic Information
|
JMH-601 |
Main Size |
10.4inch x 9inch (26.42x22.86cm) |
|
Side Length |
5.2 inch (13.2cm) |
|
|
Main Thickness |
1.5mm/2.0mm/2.5mm |
|
|
Wear layer |
0.1mm/0.15mm/0.2mm |
|
|
Function |
Waterproof/fireproof/Eco-friendly/Anti-slip |
|
|
Using Places |
Residential house like living room, bedroom, kitchen or hallway |
|
|
Warranty |
3 to 10 years |
Installation DIY Steps
1.Preparation and Clean
BEFORE INSTALLING: Be sure surface is clean, smooth, flat & dry before applying.
Area must be free of grease, dirt, wax, and other oils & materials.
FOR CONCRETE AND WOOD FLOORS: Apply a latex primer before installing.
DO NOT APPLY ON: Any cracked, uneven,or loose flooring. Do not apply overradiant heated floors.
FOR BEST RESULTS: Do not apply where the temperature regularly falls below 55°For over 85°F
2.Measurement and Plan
Map out the tiles. Start from the centre of theroom with backing stillon the tiles.
Rotate and swap around tiles to find the best designmatch.
3.Peel & Stick
You can move your layout around as needed, before trimming, to avoid inappropriate wrong cutting.
Use your utility knife to trim tiles into the size your need, then simply bend to snap in half. After that, you will get smaller pieces of tiles.
Finally, remove the release paper of the tiles and press it into the place firmly.
4.Finished
HOW MANY PACKAGES WILL I NEED?
Measure the square footage of your room and use this chart to determinehow many boxes you will need for your project. lt is recommended topurchase 10% additional tiles, which has been added to the chart below.
